AMI meters transmit electricity usage data using CORE’s own communication network. Information from the meter is transmitted back to CORE in scheduled increments, and upon request by CORE. Transmitting this information electronically means that a meter-reader no longer drives through your neighborhood for readings and CORE service personnel do not need to visit locations for requested reads or to connect or disconnect service.
The meter records an electronic kilowatt-hour (kWh) reading, the date and time of energy usage, the overall peak demand of the electric account, whether the meter has run backward, and the number of times the meter has experienced a loss of power for any reason. The meter also records the date and time of power blinks, and the duration of any power outage.
The meters help us:
- Promptly obtain member-requested meter reads.
- Give members near-real-time information about energy usage.
- Eliminate the cost of in-person meter reading.
- Pinpoint the exact location of outages by notifying CORE of a power loss, meaning a faster response time.
- Troubleshoot high-bill and low-bill problems by providing information about power consumption patterns, outage and blink-count history, and voltage information.
- Improve electric service reliability and power quality – fewer outages, blinks, and surges.
- Secure the overall safety of CORE employees.
- Better target capital spending by identifying parts of the distribution system that require upgrades.
- Help us identify power theft.
- Let members choose, within limits, when their meters are read each month.
- Provide members a pre-pay billing option.
- Develop rates that give members more choices.
- Manage additional member-sited renewable energy generation.
Probably not, unless there is a problem that requires investigation. Meter-readers no longer travel to every meter for a monthly read. All meter-reads are digitally transmitted back to CORE headquarters.
All of the cooperative’s meters can be read at any time. For billing purposes, however, member bills are read on monthly schedules. Members are able to select a three-day window within which the meters are read.
No. Reasonable access to equipment still must be maintained. This allows for CORE personnel to either read or maintain the meter, if necessary, at reasonable times.
CORE obtains meter readings through its secure communications network at predetermined intervals and upon request. The meter reading is sent back to CORE.
Yes, for a few minutes. You will need to reset electronic clocks and other devices.
No. Research conducted by the Electric Power Research Institute, the Utilities Telecom Council and others has shown no health effects from digital meters. The radio frequencies emitted by digital meters fall well below the maximum recommended in federal guidelines. The meters emit radio frequencies (RF) only at scheduled intervals, when responding to a request for data from CORE, or when the power to the service location fails. Compare this activity to a laptop with a wireless connection, which is constantly sending and retrieving data. A digital meter equipped to send and receive data has an RF density hundreds of times less than the RF density of a cell phone, and the meters are installed on the outside of your house, not next to your ear.
Routine inspections of all meters and services will be conducted to look for safety hazards, theft or other problems.