CORE’s existing Plum Creek and Sedalia substations currently run at near-maximum capacity. Timber Mill Substation will introduce 100 megawatts of additional capacity and take load off the existing substations, both of which will eventually be decommissioned.
The proposed BESS will allow CORE to store power during off-peak hours for distribution in periods in which demand is high, which helps members avoid additional fees during on-peak hours.
Expansion of the existing Plum Creek and Sedalia substations is not possible because of a lack of suitable and/or available land at either site. The proposed location for Timber Mill Substation is ideal because it is adjacent to an existing 115-kilovolt transmission line between the Plum Creek and Sedalia substations.
The proposed site is within a 41-acre parcel owned by CORE Electric Cooperative and zoned for agricultural use. The substation and its yard will have a footprint of approximately 390 feet by 370 feet. The BESS and its yard will be approximately 360 feet by 370 feet.
Current landscape views near the project site will not change significantly.
Transmission lines already exist in the immediate area, and the project is consistent with the Douglas County Comprehensive Master Plan 2040, which protects, where appropriate, views to and from significant natural features.
A 7-foot perimeter fence will surround the substation and BESS.
Lighting at the substation will be night-sky compliant, downcast and used only during emergencies such as unplanned outages.
Timber Mill Substation will not generate fumes, odors or particulates.
Substations emit low-frequency EMF radiation, which is non-ionizing. EMF levels decrease rapidly further from the source — mainly transformers — and normally the EMF outside of a substation is no greater than what is inside a typical residence. Modern substations are also designed to emit lower levels of EMF and follow strict safety standards.
The BESS includes many safety features that minimize the risk of fire. Each battery unit within the BESS is continuously monitored by an on-site system to automatically detect abnormal conditions and stop operations, if needed. An off-site, 24-hour control room with trained technicians also constantly monitors the site and can remotely shut down the facility, if needed.